RDF-GW2 — Industrial Linux Edge Computer
Your industrial data is no longer unprotected. RDF-GW2 combines Linux-based flexibility with Microchip Trust&Go security.
The RDF-GW2 is a professional edge gateway built on the ATSAMA5D27 chip, featuring an Arm® Cortex®-A5 processor. Designed for 24/7 operation with low power consumption, the device integrates LoRa, WiFi, BT, and 868MHz RF wireless stacks into a single unit. It provides top-tier encryption for your IoT cloud connections via the hardware-based Secure Element (ECC608).
Core Performance Architecture
Arm® Cortex®-A5 (500MHz)
Optimized Linux performance. A stable core architecture for industrial automation and data gateway tasks.
ECC608 Secure Element
The key to cybersecurity in the IoT world. Hardware-based certificate protection with secure cloud provisioning.
Triple-Wireless Connectivity
Connect sensor networks directly to the IP world with WiFi, Bluetooth, and 868MHz RF support.
CAN / CAN FD & Modbus
Speak the language of machinery. Ready for high-speed industrial communication protocols with its CAN-FD port.
Technical Specifications
| Component | Specifications |
|---|---|
| Processor | High-Performance Arm® Cortex®-A5 Industrial Processor |
| Memory | 256 MByte LPDDR2 SDRAM |
| Wired Network | 10/100Base-TX Ethernet PHY |
| USB Ports | 1x Host, 1x Device, 1x Debug Port |
| Wireless | WiFi & Bluetooth + LoRa + 868MHz RF |
| Security | Microchip ATECC608 (Trust&Go) |
| Expansion | CAN-FD / External I/O Module Communication Port |
| Display Support | 7-Segment Panel Communication Interface |
| Operating Voltage | Industrial DC Power Supply |
Application Areas
Modular application capabilities that make RDF-GW2 your smartest assistant in the field.
PLC & Data Collection
Gathering status info from CNC or machine lines and writing data via Modbus/CAN.
Secure IoT Gateway
100% secure certificate-based connection to AWS/Azure/Google Cloud via secure element.
LoRa & RF Gateway
A star network manager overseeing LoRa sensors in remote locations.
Developer Terminal: Hardware Test
Query the CAN-FD line or Secure Element status in seconds using the Linux terminal on RDF-GW2.
# Configure CAN-FD Interface
ip link set can0 up type can bitrate 500000 dbitrate 2000000 fd on
# Query Secure Element Status
crypto_check --device ecc608 --verify-cert
# Ethernet and Wireless Interface Check
ifconfig -a
--- RDF-GW2 System Readiness Check ---
Processor: Arm Cortex-A5 500MHz -> OK
RAM: 256MB LPDDR2 -> OK
Secure Element: ATECC608 (Trust&Go) -> VALIDATED
RF Stack: LoRa/868MHz Interface -> READY
Result: Industrial Gateway Operational!Package Content
- ✅ RDF-GW2 - Industrial Linux PC (Embedded Linux Pre-installed)
- ✅ Industrial Grade DC Terminal Connector
- ✅ RF 868MHz / LoRa SMA Antenna Set
- ✅ SDK & Linux Developer Documentation